The EPEVER Tracer AN Series Solar Demand Controller is usually a extremely economical solar controller made for off-grid photo voltaic techniques. Based upon multiphase synchronous rectification know-how, it assures optimized Electrical power conversion and procedure balance for an array of photovoltaic (PV) programs.
Essential Capabilities on the EPEVER Tracer AN Sequence Controller
The Tracer AN series utilizes EPEVER Photo voltaic Demand Controller technologies for outstanding solar Strength harvesting. Essential capabilities contain:
Multiphase Synchronous Rectification (MSR) for enhanced Electricity conversion.
State-of-the-art MPPT Algorithm with >ninety nine% efficiency.
Dual-Phase Charging for Improved battery lifetime.
Liquid crystal display Display screen with serious-time facts checking.
Various Load Control Modes which include handbook and timer.
In depth Electronic Protections from overcharging, around-discharging, quick circuits, and reverse polarity.
Move-by-Move Manual to Creating the EPEVER Tracer AN Series Controller
1. Unboxing and Getting ready the Controller
Make certain all elements are involved: Tracer AN device, temperature sensor, communication cables, and user manual.
Validate the product variety and voltage rankings match your solar panel and battery specifications.
two. Mounting the Demand Controller
Decide on a properly-ventilated, dry site near the battery lender.
Protected the Tracer AN controller utilizing the delivered mounting brackets.
Retain suitable clearance for heat dissipation.
3. Wiring the Solar Demand Controller
Caution: Often abide by right basic safety protocols and ensure the technique is powered off before connecting factors.
Move 1: Connect the battery terminals into the demand controller (good to good, negative to detrimental).
Phase 2: Link the solar panel array on the PV input terminals.
Step 3: Join the load terminals if utilizing a immediate load connection.
Stage four: Double-Examine all connections for polarity and tightness.
four. Configuring the Controller Settings
Power over the controller by connecting the battery 1st.
Use the Liquid crystal display Screen to navigate the options menu.
Configure:
Battery Kind: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Control Modes: Manual, timer, light-weight Handle.
five. Monitoring and Knowledge Logging
The Tracer AN Series supports real-time monitoring using the MT50 distant meter.
Details might be logged through the RS485 interaction port utilizing software program including Solar Station Laptop.
Remote monitoring is possible While using the EPEVER WiFi module.
6. Troubleshooting Common Difficulties
Problem one: No Electric power Output
Verify battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Concern two: More than-Voltage Security
Verify the photo voltaic array’s voltage score.
Alter system parameters if needed.
Issue visit here three: No Battery Charging
Inspect PV wiring for continuity.
Confirm MPPT options in the menu.
Advantages of the Tracer AN Collection with MSR Technological innovation
The multiphase synchronous rectification technology assures:
Higher Effectiveness: Lessened Power losses all through conversion.
Enhanced Trustworthiness: Stable functionality under variable masses.
For a longer period Battery Existence: Dependable and correct charging profiles.
Summary
The EPEVER Photo voltaic Charge Controller with multiphase synchronous rectification technological innovation can be an Excellent option for optimizing solar power era and increasing battery existence. By pursuing the above mentioned setup information, buyers can make sure utmost performance and program longevity.